HK DG4V5 A 110VAC

Magnetspule 110V AC für HKDG4V5

The product image may differ

Nominal voltage +/- 10 %

110 V AC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 110

Average power consumption

7 W

Lejuplādējiet PDF

Lūdzu, izvēlieties versiju

Rādīt izstrādājumu tabulu

HK DG4V5 G 12VDC HK DG4V5 H 24VDC HK DG4V5 A 110VAC

Reģistrējieties tagad, lai varētu piekļūtu mūsu tiešsaistes veikalam.

Mūsu klientu apkalpošana: +371 27339222

Produkta detaļas uz

HK DG4V5 A 110VAC

Nominal voltage +/- 10 %

110 V AC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 110

Average power consumption

7 W

Īpašības

Customs tariff number

85059029

Produkta apraksts

Norādes

In case of AC coils the power input is significantly higher in the considerably phase than in the holding phase. These must therefore never be operated without a magnet core since there is a danger of overheating and the coil can burn through. A similar effect occurs if valves with AC magnets are operated with extremely high pulse frequencies (On / Off). In such cases the coils, which are often in the vicinity of the high power input, can also overheat. For such applications the use of RC coils with rectifier plugs is recommended.
With DC coils extremely high power spikes can occur during powering down. We therefore recommend the use of plugs with protective circuits when using such coils.
Tightening torque for attaching nuts of the solenoid coils: 3Nm

Pasūtījuma informācija

Other types of coil available on request