PR 10-2 V2

Hydraulic tube 10x2 1.4541

The product image may differ

Ø d1

10 mm

2 mm

Specific load I

523 bar

Lejuplādējiet PDF

Lūdzu, izvēlieties versiju

Rādīt izstrādājumu tabulu

PR 04-1 V2 PR 06-1 V2 PR 06-1.5 V2 PR 08-1 V2 PR 08-1.5 V2 PR 10-1 V2 PR 10-1.5 V2 PR 10-2 V2 PR 12-1 V2 PR 12-1.5 V2 PR 12-2 V2 PR 14-1 V2 PR 14-2 V2 PR 14-2.5 V2 PR 15-1 V2 PR 15-1.5 V2 PR 15-2 V2 PR 15-2.5 V2 PR 16-1 V2 PR 16-1.5 V2 PR 16-2 V2 PR 18-1 V2 PR 18-1.5 V2 PR 18-2 V2 PR 18-2.5 V2 PR 18-3 V2 PR 20-1 V2 PR 20-1.5 V2 PR 20-2 V2 PR 20-2.5 V2 PR 20-3 V2 PR 20-4 V2 PR 22-1 V2 PR 22-1.5 V2 PR 22-2 V2 PR 22-2.5 V2 PR 22-3 V2 PR 25-2 V2 PR 25-2.5 V2 PR 25-3 V2 PR 25-4 V2 PR 28-1 V2 PR 28-2 V2 PR 28-2.5 V2 PR 28-3 V2 PR 28-4 V2 PR 30-1.5 V2 PR 30-2 V2 PR 30-2.5 V2 PR 30-3 V2 PR 30-4 V2 PR 32-1.5 V2 PR 32-2 V2 PR 34-2 V2 PR 35-1.5 V2 PR 38-2 V2 PR 38-3 V2 PR 38-4 V2 PR 38-5 V2 PR 40-1.5 V2 PR 42-2 V2 PR 42-3 V2 PR 54-2 V 2

Reģistrējieties tagad, lai varētu piekļūtu mūsu tiešsaistes veikalam.

Mūsu klientu apkalpošana: +371 27339222

Produkta detaļas uz

PR 10-2 V2

Ø d1

10 mm

2 mm

Specific load I

523 bar

Specific load III

360 bar

Ø d2

6 mm

AD tolerance +/-

0.08 mm

ID tolerance +/-

0.15 mm

Visas īpašības

Īpašības

Construction type

precision steel tube, seamless, (cold-drawn), metric

Design

metric

Material

stainless steel X6CrNiTi18-10 (1.4541 / AISI 321)

Material condition

CFA = bright annealed (annealed, metallically bright)

Standard

DIN EN 10216-5

Tube length

5 to 7 metres*.

Customs tariff number

73044100

Visas īpašības

Produkta apraksts

Norādes

The pressure figures are based on straight tubes.
The appropriate wall thickness needs to be calculated for tubes with bends as stipulated in DIN EN 13480-4.
*Stainless steel tubes are supplied in manufactured lengths according to EN 10216-5. In terms of production, these are usually 6 meters (+/- 1m). Order quantities are rounded to the nearest possible total length, without cutting.

Apraksts

The stainless steel pipes made of materials 1.4301 / AISI 304 (V1), 1.4541 / AISI 321 (V2) and 1.4571 / AISI 316Ti (V4) are supplied in CFA condition (bright annealed) as standard. This condition offers very good bendability and is the established standard in the hydraulics sector, particularly for the installation of pipelines.
Our stainless‑steel tubes are tested according to DIN EN 10216‑5. The dimensional tolerances (Ø, wall thickness, ovality) are restricted in accordance with DIN EN 10305‑1 ranging from 4 to 42 mm in outer diameter (Ød1). Larger dimensions are classified according to EN ISO 1127 D3/T.

Papildu informācija

Calculation analog DIN 2413
Specific load I: static (up to 120 °C)
Load case III: dynamic (up to 120 °C) stress range = P bar
Strength parameter: K 222 [N/mm²]
Safety coefficient: S 1.5
Fatigue strength: σSch/D 225 [N/mm²]
Tolerances (Ø, wall thickness, ovality) in accordance with DIN EN 10305-1
Elastic strength to DIN DIN 10216-5 Rp 1.0 to 50°C
The fatigue strength value was reduced in relation to the strength parameter by 1.4571.

Pasūtījuma informācija

Other delivery conditions, such as CFD, are available on request and must be specified separately.